17
White (Solid) = Left +
White / Black (Striped) = Left -
Grey (Solid) = Right +
Grey / Black (Striped) = Right -
Fig.9 High Level / Speaker Level Input
1) Cut RCA Plugs off at the black heatshrink in the middle of the pigtail wires.
2) Connect the wires from the speaker output of the radio to the white and grey wires of the amplifier input
wires using the color codes in above drawing.
3) If you are using both High Level / Speaker Inputs , make sure the MODE Selector switch is in the
3CH position
SOURCE INTERCONNECT
Single High Level / Speaker Input