REAR DECK MOUNTING
In rear deck or package tray installations, carefully check the operation of the trunk suspension springs or
tension bars. These tension bars move when the trunk opens and closes, so make sure speaker installation
does not interfere with this mechanism. Also, when installing the speakers near a rear window check to make
sure there is plenty of access to secure the mounting screws.
•
A: Speaker mounting depth and hole cutout diameter (See enclosed mounting template).
•
B: Cut hole using saber saw/ utility knife.
•
C: Connect wiring to speaker terminals. Make sure of polarity (+)positive (-)ground.
Using a philips screwdriver secure speakers and mounting ring (if applicable).
SPECIFICATIONS FOR POWERBASS PS-SERIES SPEAKERS
(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)
Model
Size
Nominal
Impedance
Frequency
Response
Sensitivity
1W/1M
Magnet Size
Mounting
Depth
Power RMS/
Peak
PS-65
6.5”
4-ohm
60Hz-20kHz
87dB
5.5 oz.
1.71”
30W/90W
PS-69
6x9”
4-ohm
50Hz-20kHz
90dB
11.4 oz.
3.11”
40W/120W
This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other
than its intentions is strictly prohibited without the express consent of PowerBass USA, Inc.
Copyright 2015 PowerBass USA, Inc.
