PowerBass PB-DBR1, Owner'S Manual

Page: 4 / 12

CONTROL PANEL LAYOUT
1. WIDE
Adjusting this controls the width of the frequency range that will be restored. Minimum setting
provides narrow width, Maximum provides a wide range.
SWEEP Adjusting this controls the center frequency for restoration. 30Hz - 80Hz minimum to maximum
setting.
2. STATUS LED
illuminates when the PB-DBR1 is powered on and operational. Blue indicates functioning
normally, Red indicates there is a fault in the operation and the unit is in protection mode.
3. BALANCED INPUT RCA Input from your source unit by RCA cable connection.
4. OUTPUT RCA
Output to your amplifier by RCA cable connection
5. REMOTE CONTROL Attach the supplied remote volume control knob to adjust the output remotely from
the listening area. Bracket Mount or Flush Mount with removable LED.
6. POWER INPUT PLUG
All power connections 12V, Ground, and Remote Turn on ( see pg. 5 for connec-
tion instructions )