SPECIFICATIONS FOR AUTOSOUND D CLASS AMPLIFIERS
PowerBass Autosound Class D Models
ASA 1000.1Dx
ASA 1500.1Dx
Power Output @ 14.4 VDC Input
•
4 Ohms RMS at THD 0.5%
250W x 1
325W x 1
•
2 Ohms RMS at THD 0.5%
500W x 1
750W x 1
•
2 Ohms Max OUTPUT
1000W
1500W
Signal to Noise Ratio
> 80dB
Frequency Response
20 Hz ~ 250 Hz ± 1dB
Crossover
•
Low Pass Filter
40Hz ~ 250 Hz
•
Crossover Slope
12dB Octave
•
Sub Sonic Filter
15Hz ~ 50Hz
•
Bass EQ at 45Hz
0 ~ 18 dB
Input Gain Control
0.5V ~ 4.0V
Low Level Input Impedance
22K Ohms
Damping Factor
>150 into 4 Ohms
Fuse Rating/ ATC Style
3 x 40A
150A External*
Dimension
•
Width (W) x
11.35” (288 mm)
•
Height (H) x
1.92” (49 mm)
•
Length (L) mm
13.75” (350 mm)
15.0” (381 mm)
*Not Supplied
this amplifier must be externally fused
For each ASA 1500.1D amplifier installed, use one 150A ANL type fuse (not included).
Important Notes:
•
Due to continuing improvements these specifications are subject to change without any
notice.
•
Do not attempt to fix or repair this unit. Unauthorized repairs will void the manufacturer’s
warranty.
21
