TROUBLESHOOTING TIPS
Problem
Solution
No Sound
1. Check “Power” and remote turn-on for the proper
voltage.
2. Center the Fader Control
3. Turn up the “Input Gain” controls
4. Check the Ground connections
5. Push the “Source” button
Hiss
1. Turn down the amplifier gains
2. Faulty RCA interconnect cables
Distorting Speakers
1. Adjust the equalization levels
2. Lower the volume of the Source unit
3. See your Dealer
SPECIFICATIONS
Frequency Response: 20Hz-40,000Hz
Pre Graphic Frequency: 70Hz, 250Hz, 3kHz, 15kHz
Total Harmonic Distortion (THD): 0.05%
Signal to Noise Ratio: >100dB
Rear Inputs (RCA style): switchable to Radio or AUX
Front Input (3.5 mm): AUX
Equalization Boost/Cut: -/+ 18dB
Subwoofer Crossover Frequency: selectable 80Hz or 120Hz
Channel Separation: 75dB
Maximum Output Voltage: 10Vrms
Power Supply: 11-15V DC negative ground
Fuse: 1Amp (AGC type)
Dimensions: Chassis 6.8”W x 1.3”H x 4.2”D
(173mm x 33mm x 107mm)
Mounting Depth: 4.5”D (115mm) (including RCA jacks)
(Due to continuing improvement, features and specifications are subject to change without notice)
This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions
is strictly prohibited without the express consent of PowerBass USA, Inc. ©Copyright 2013 PowerBass USA, Inc.
