background image

8

9

•  Be careful during adjustment of the 

machine to prevent entrapment of the 

fingers between moving tine assemblies 

and fixed parts of the machine. 

•  Always allow the machine to cool down 

before storing. 

•  When servicing the tine assembly, be aware 

that, even though the power source is 

switched off, the tine assembly can still be 

moved manually. 

•  Replace worn or damaged parts for safety. 

Use only genuine replacement parts and 

accessories. 

•  When the machine is stopped for servicing, 

inspection, or storage, or to change an 

accessory, shut off the power source, 

disconnect the machine from the supply 

and make sure that all moving parts have 

come to a complete stop. Allow the machine 

to cool before making any inspections, or 

adjustments, etc. Maintain the machine with 

care and keep it clean. 

•  Store the machine out of the reach of 

children.

Intended Use

This product is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given 

supervision or instruction concerning the use of the product by a 

person responsible for their safety.
Children should be supervised to ensure that they do not play with 

the product.
i.  This scarifier and raker is designated with a rated input of 1400 

Watts. Depending on the fitted cutting device, this product is 

either intended for scarifying and removing thatch from lawns or 

for raking in domestic and hobby gardens.

ii.  When used as a scarifier, this product works by opening up the 

surface by removing moss and organic matter (thatch) allowing 

more air, moisture and nutrients to access the roots, thereby 

providing a healthier lawn.

iii.  When used as a raker, the tines will remove moss and dead 

grass from the lawn.

iv.  This product is not too be used in wet weather conditions and 

may not be used to mow dry, wet or unusually high grass, e.g. 

pasture grass or for shredding leaves.

v.  This product is intended for private domestic use only, not for 

any commercial trade use. It must not be used for any purposes 

other than those described.

Warnings Symbols

Caution/Warning.

Read the operator’s the manual.

Wear eye protection. Wear hearing protection (PPE). 

Wear hand protection. 

Summary of Contents for DT5310















Reviews: