7
s) Retain the original product literature for
future reference.
t) Use only the cell or battery in the
application for which it was intended.
u) When possible, remove the battery from
the equipment when not in use.
v) Dispose of properly.
w) The charging temperature is between the
range of 5°C to 45°C.
Charging the Battery
If the battery cannot fit into the charger properly, remove it
from the charger. Only charge a Powerbase battery in the
correct charger. If the battery is hot after use in the tool, let
it cool down before charging.
a) Connect the charger to the mains.
b) Insert the battery (1) into the charger, until it clicks into the
locked position (Fig.1).
c) Frequently monitor the charger and battery (1) while charging.
d) It takes about 1 hour to charge a fully discharged 2.5Ah battery
with a Powerbase 2.4A charger B0Q-SP06-20ZB.
e) Remove the battery (1) from the charger when it is fully
charged and unplug the charger from the mains.
f) To remove the battery (1) from the charger, press the release
button (2) on the battery (1) and push the battery (1) out.
g) Let the battery (1) cool down before use.
(1)
