manualshive.com logo in svg

PowerBase 577166, Instruction Manual

Share
Download
PowerBase 577166 Instruction Manual Download Page 19

19

WARNING! 
Before using the tool, read all instructions carefully.

Blade sheath
  Charging the battery

NOTE: The battery pack comes partly charged. Charge the 

battery pack prior to first use, ideally at least 60 minutes. 

• 

Always pull out the plug of the charger from the mains before 

removing or connecting the battery pack to the charger.

• 

Never charge the battery pack when the ambient temperature 

is below 0°C or above 45°C.

• 

Never recharge a battery pack again immediately after 

rapid charging. This could overcharge the battery pack, thus 

reducing the lifespan of the battery pack and charger.

• 

Rest the charger for at least 15 minutes between continuously 

charging sessions.

• 

If no battery pack is inserted into the charger and the charger 

is connected to mains, the charging status LED shows red.

NOTE: Always fully charge the two batteries at same time.

Checking battery capacity

Press the battery capacity level button to check the charging level 

of the battery pack. The status/remaining charge will be shown on 

the battery charging level indication light.
 

3 Green LEDs continuously Lit

Battery pack fully charged

2 Green LEDs continuously Lit

Battery pack 65% charged

1 Green LED continuously Lit

Battery pack 35% charged

No LED lit

Battery is dead and needs to 

be charged

button

LED

Summary of Contents for 577166




























Reviews:

No comments

Brands by name

Popular brands

Load more brands