14
Carefully remove the blade cover from the cutting blade before use.
NOTE:
Always attach the blade cover over the blade when the hedge
trimmer is not in use, for storage and transportation.
Blade cover
Assembly
Check the hedge trimmer for any missing parts.
If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or
missing parts could result in serious personal injury.
Verify that the mains voltage coincides well with that indicated on
the rating plate on the power tool.
Never block the On/Off switch. Once it is released, it must
automatically stop the motor. In case the switch is damaged, the
device should not be used by any means.
Verify that the main power supply where the power tool is
connected, incorporates a circuit breaker to be quickly tripped at a
maximum of 30mA. If not, use a removable circuit breaker available
from your local store.
Use of the hedge trimmer
Operation
