WiFi Disk simple Manual
12
A. If you choose the AP+Client Mode, then you will enter into the following interface:
a. Press “Rescan” and it will scan the scope of the wireless router. Select the
wireless connection you need in the list of SSID (i.e. choose “power 700” and then input
the password of “power700” in the password field).
b. IP Address: You can set up the IP Address through two methods:
i. Dynamic IP: Obtain the IP through the DHCP of the router (i.e. power 700).
ii. Static IP: Obtain the IP by manually input the IP Address (must be the same