PAGE 9 OF 18
Door
1.
Your shed will either come with a single door or a double door depending on what you selected
when ordering. Double doors are already hung on the door panel. However, for a single door you will
need to hang the door.
For a single door you can choose which way round to hang it
–
left hand or right hand.
s
(note
–
if you choose a left hand hinged door then the lock has to be unscrewed and positioned the
correct way round as it will be upside down)
2.
For a single door, lay the door panel on the floor (you can lie it on the shed floor if you wish). Line up
the door onto the framing so that it is square. The door should be positioned closer to the side
where the hinges go. Make sure the lock is on the inside of the shed when the door is closed. Secure
the hinges in place using the 25mm screws provided.
3.
Choose two places on the door to secure your two turn buttons
–
one towards the top, one towards
the bottom. For double doors a turn button will already be secured. Be careful not to screw this too
tightly or it will not turn.
Important
–
make sure the door is unlocked before the next stage or once you have assembled the side
walls you will not be able to get in your shed. The key is screwed to the back of the door.
Summary of Contents for Pent
Page 6: ...PAGE 6 OF 18 ...
