6.
Before attaching the other door wing, attach the door sill which looks like a piece of framing in half. This will
be screwed to the floor beneath with 35mm screws.
We would strongly recommend to pre-drill the holes to avoid splitting
.
This sill should be 147mm from each end of the floor (but not the floor bearer) and attached to the very
outside edge of the floor. (see image below)
7. You can then secure the other door wing using 50mm screws.
PAGE 10 OF 18
Summary of Contents for Apex Bike
Page 2: ...Power Apex Bike Shed...
