Power AirFryer Pro Plus CM003, Owner'S Manual, Page: 8 / 20

Placing Air Flow Racks into Unit
Components
Rotisserie Shaft & Skewers Racks
1.
Place the two Skewer Racks at each end of
the Rotisserie Shaft. Make sure the Set Screws
are on the outer side of the Rotisserie Shaft.
2.
Slightly tighten Set Screws. Do not overtighten as
you may need to adjust the tightness after
you insert the Skewers.
3.
Carefully poke Skewers through food.
1. Insert Drip Tray into bottom of the Unit.
2.
Place Air Flow Racks into Unit by sliding through
the side grooves and onto the back lip (FIG. A).
3. Place Air Flow Racks closer to the top heating
element for faster cooking and added crisp (FIG. B).
4. Rotate the Air Flow Racks mid-cycle for even
cooking.
SET SCREW
FIG. A
FIG. B
8
P ower AirFryer Pro Plus™ | Model: CM003
Using the Accessories
SKEWER RACK (x2)
FRONTAL VIEW
ROTISSERIE SHAFT
FINAL ASSEMBLY
FRONTAL VIEW
LEFT SIDE
ROTISSERIE SHAFT
LEFT SIDE
ROTISSERIE SHAFT
RIGHT SIDE
RIGHT SIDE
SET SCREWS SKEWERS
(x2) (x10)
SET SCREW
SKEWER RACKS