manualshive.com logo in svg

Power Wheels V3298 TOT ROD Toy Story 3, Owner'S Manual With Assembly Instructions

Share
Download
Power Wheels V3298 TOT ROD Toy Story 3 Owner'S Manual With Assembly Instructions Download Page 15

V3298pr-0920

15

• Press the drive button on the steering wheel. The 

vehicle drives forward at a maximum speed of 2 mph.

• Help your child practice steering to learn how far and 

how quickly to turn the steering wheel when driving.

• To stop, release the drive button.

• Make sure your child is comfortable with steering the 

vehicle and automatically knows how to stop.

Stage 1 - Parent Assisted Driving

Stage 2 - Child Driver

Handle

Latch

Note: 

Be sure the end of the handle is clean and free 

from debris before reinserting.

• Make sure the front wheels are not turned.

• Locate the latch next to the steering handle.

• Press the tab and slide the latch open.

• Lift and remove the handle from the vehicle, and release 

the tab.

• Store the handle for future use.

PRESS

VEHICLE OPERATION

Make sure the handle is installed (see Assembly 

• 

step 17).
Grasp the handle to assist your child.

• 

Have you child press the drive button on the steering 

• 

wheel. The vehicle drives forward at a maximum of 
2 mph. 

PRESS

Summary of Contents for V3298 TOT ROD Toy Story 3





















Reviews:

No comments

Brands by name

Popular brands

Load more brands