Power Wheels Kawasaki KFX Ninja J8472 Owner'S Manual & Assembly Instructions Download

Page: 18 / 24

J8472a-0920

As assembled, your vehicle is ready to roll in low speed (2

mph, maximum). It has been pre-set so it will only operate in low speed. After your child

has mastered the basic skills of driving and understands the rules for safe driving, it’s time to connect the high speed connectors to allow the vehicle to
operate in high speed

. See the instructions on this page to connect the high speed connectors and operate the vehicle at high speed.

Beginner Use - Low Speed Drive

• Press the

DRIVE

button on the tank.

• Press the foot pedal. The vehicle goes forward at a maximum of 2

mph.

• Help your child practice steering to learn how far and how quickly to

turn the handlebar when driving forward in low speed.

To Back Up

Advanced Use - High Speed Drive

• Remove the seat to access the high speed hook-up.
• Locate the high speed connector in the opening inside the front end

of the vehicle. Plug the high speed connector (with yellow tag) into
the matching connector (with yellow tag).

• Re-assemble the seat.
• To prevent operation of the vehicle in high-speed, simply disconnect

the high speed connectors.

VEHICLE OPERATION

• Your vehicle has a patented, electronic braking system that auto-

matically stops the vehicle when your child’s foot lifts from the pedal.

• Make sure your child is comfortable with steering the vehicle and

automatically knows how to stop.

STOP!

Drive

Reverse

IMPORTANT! To prevent damaging the motors and gears, teach
your child to stop the vehicle before switching direction.

• Press the

REVERSE

button on the tank.

• Press the foot pedal. The vehicle backs up at a maximum of 2

mph.

• Help your child practice steering to learn how far and how quickly to

turn the handlebar when driving in reverse.

• Turn the right grip to shift the vehicle into high speed. The vehicle

drives forward at a maximum of 5 mph.

• Help your child practice steering to learn how far and how quickly to

turn the handlebar when driving forward in high speed.

IMPORTANT!

Use the vehicle ONLY outdoors. Most interior flooring

can be damaged by riding the vehicle indoors. Fisher-Price

will not

be responsible for damage to floors if vehicle is used outdoors.

Twist Grip

to Activate

High Speed

Summary of Contents for Kawasaki KFX Ninja J8472

























Search results

Summary of Contents for Kawasaki KFX Ninja J8472

Reviews:

Related manuals for Kawasaki KFX Ninja J8472

Brands by name

Popular brands

Power Wheels Kawasaki KFX Ninja J8472, Owner'S Manual & Assembly Instructions

Search results

Summary of Contents for Kawasaki KFX Ninja J8472

Reviews:

Related manuals for Kawasaki KFX Ninja J8472

Brands by name

Popular brands