16
F
H4435pr-0921
ASSEMBLY
• Using safety scissors, cut the plastic tie holding Backpack in the
holder. Remove Backpack from the holder.
Note to Retailer:
Do not remove the plastic tie. Simply lift Backpack
from the holder and assemble the holder to the top edge of the
vehicle. Replace Backpack in the holder.
• Fit the holder to the top edge of the vehicle as shown.
• Insert two #10 x 1" screws into the holder. Tighten the screws.
• Fit Backpack into the holder.
29
30
Holder
Backpack
Holder
Backpack
28
• Fit the spacers
between
the upper holes of the brush guard and the
front end of the vehicle .
• Insert two #8 x 4" screws through the two
upper
holes in the brush
guard, through the spacers and into the front end of the vehicle .
Tighten the screws.
A
Spacers
#8 x 4" Screws
A
B
B
Summary of Contents for H4435
Page 27: ...27 H4435pr 0921...
