How to Operate Your Scooter
18
•
To put the kickstand down,
simply slide it toward the
front end of the scooter.
•
To put the kickstand up,
roll the scooter forward and
then push the kickstand up.
6
7
Kickstand
Caring For
Your Scooter
L
• When needed, inflate tires with a hand pump to
30 psi
.
• Check all screws, cap nuts and protective coverings
regularly and tighten as required. Check plastic parts on
a regular basis for cracks or broken pieces.
• During snowy or rainy weather, the scooter should be
stored inside or under a protective cover. Remember to
charge the battery at least once per month while your
scooter is not in regular use.
• Avoid operating the scooter in wet or snowy conditions
and do not spray the scooter with a hose. Do not wash
the scooter with soap and water. Water or moisture in
the motor or electrical switches can cause them to
corrode and could cause switch or motor failure. Do
not immerse the scooter.
• Avoid operating the scooter on sand, loose dirt or gravel.
Sand, loose dirt or gravel in the motors or electrical
switches can cause them to jam and could cause switch
or motor failure.
• The scooter can be wiped down with a soft, dry cloth.
For a shiny finish, you can wipe plastic parts with a
non-wax furniture polish applied to a soft-cloth. Do not
use automotive wax. Do not use soap and water or
spray the scooter with a hose.
• To ensure that your scooter stays in good operating order,
we recommend that you periodically have your scooter
checked by a Power Wheels
®
authorized service center.
For the location of the authorized service center nearest
you, please visit us on-line at
www.powerwheels.com
or
call
1-800-348-0751
.
•
Tire repair must be done by a Power Wheels
®
authorized service center.
For the location of the
authorized service center nearest you, please visit us on-
line at
www.powerwheels.com
or call
1-800-348-0751
.
Tire Valve
WARNING
To prevent tire explosion:
• Never inflate above 30 psi.
• Use only a hand pump to prevent
over-inflation.
