ASSEMBLY
15
P6827pr-0920
• Fit the Steering
Column cap onto
the end of the
steering column.
• Insert a #8 x
3
/
4
"
screw through the
large opening in the Steering Column cap and into the hole in
the steering column. Tighten the screw.
• Turn the vehicle upright.
24
• Position the steering wheel so that the large opening is
UP
.
• Fit the steering wheel onto the steering column.
25
• While pressing down on the steering wheel, grasp the steering
column under the dash and pull it up as far as it will go.
• Insert the
5
/
32
" x 1
1
/
2
" pin through the hole in the steering column.
• Grasp the steering column again and pull down to fit the pin
into the center of the steering wheel.
26
• Fit the steering wheel cap onto the center of the steering wheel.
• Insert two #8 x
3
/
4
" screws and tighten.
27
Steering Wheel Cap
Large Opening
Steering Column
Steering Wheel
Lift Steering
Column
Press Wheel
Steering Column Cap
DASH VIEW
