background image

FM RADIO/SIMULATED CD PLAYER/

DIGITAL CLOCK/MICROPHONE USE

27

J5246pr-0921

L

Power/Volume

•  Press the power button 

 to turn on or off.

•  Turn the volume dial 

 to adjust to a comfortable listening level.

Hint:

 The FM Radio will turn off automatically after about one hour of non-use.

The Simulated CD Player will turn off automatically after about 10 minutes of non-use.

FM Radio

•  Press the scan button 

 to find a station.

•  Press the scan button 

 again to go to the next station.

•  To reset the radio to the first station, press the scan reset button 

.

•  FM Radio reception varies from area to area. If the tuned station is lost due to 

poor reception, the radio automatically scans to the next station with good reception.

Hint:

 Each time power is turned off and back on, the FM Radio will reset to the first station.

Simulated CD Player

•  Press the simulated CD to “pop” it in.
•  Press the track forward 

 or track back   buttons to move ahead or backward through the songs.

•  Press the eject button 

 to switch back to FM Radio.

Setting the Digital Clock

•  Press the eject button 

 to "eject" the simulated CD.

•  Press the power button 

 off.

•  Press the hour adjust button 

 to set the hour.

•  Press the minute adjust button 

 to set the minute.

Hint:

 Your child may accidentally hit the hour or minute adjust buttons and change the time on the clock. Simply use these buttons to reset to the 

correct time!

Microphone

•  Press the button on the side of microphone and talk. Listen to your voice.
•  Press any button on the top of the microphone for fun phrases!

IMPORTANT!

 If the FM Radio, Simulated CD Player or Digital Clock function erratically, press the main reset button with the point of a pen (or similar object).

Eject

Main 

Reset 

Simulated 

CD

Track 

Back 

Track 

Forward

Power

Volume

Hour Adjust 

FM Radio Station/

Time Display

Scan 

Reset

Scan

Minute 

Adjust

MICROPHONE

Summary of Contents for CADILLAC ESCALADE CUSTOM EDITION J5246





































Reviews: