Page No. 4
Issue Date: Rev 5 1 Sep. 2010
Parts List and Operating Instructions
Form No. 102948
Hydraulic Jack
Max. Capacity: 5 Ton
10 Ton For 9210A
20 Ton For 9220A
INTRODUCTION
These instructions are written to help you, the user, more effectively use and maintain your
Power Team jacks. Some of the information applying to construction, installation, operation, in-
spection, and maintenance of hydraulic jacks was selected from ANSI B30.1 and ASME PALD-
1. The documents may be ordered from the American Society of Mechanical engineers, United
Engineering Center, 345 East 47th, New York, New York 10017.
FILLING THE RESERVOIR
WARNING
Do not overfi ll the reservoir! This jack’s maximum lift stroke is determined by the amount of
oil in its reservoir. If too much oil is added, the piston could extend beyond its length caus-
ing it to fall out of the jack.
1. Fill the Reservoir
A. Fill with oil only to the level indicated in Figure 1.
B. Always stop pumping the jack handle as soon as the yellow lift stop line appears on the
piston.
Yellow Lift Stop Line
Oil Fill Level
