English
BATTERIES
These batteries have been designed to provide maximum
trouble-free life. However, like all batteries, they will
eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we sug-
gest the following:
Remove the battery pack from the charger once it
is fully charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is
below 80°F and away from moisture.
Store battery packs in a 30%-50% charged
condition.
Every six months of storage, charge the pack as
normal.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve natural resources, please recycle
or dispose of batteries properly.
This product contains lithium-ion batteries.
Local, state or federal laws may prohibit
disposal of batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack’s terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove
any of its components. Batteries must be recycled
or disposed of properly. Also, never touch both
terminals with metal objects and/or body parts as
short circuit may result. Keep away from children.
Failure to comply with these warnings could result
in fire and/or serious injury.
and use the tool in a light duty application. After about
a minute, the pack will warm up and begin operating
normally.
CHARGING THE BATTERY PACK
See Figure 1.
Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, you should charge
prior to first use. If the charger does not charge the bat-
tery pack under normal circumstances, return both the
battery pack and charger to your nearest Authorized
Service Center for electrical check.
Charge the battery pack only with the recommended
charger.
Refer to the charger operator’s manual for charging
instructions.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. A hot battery pack may be placed directly
onto the charger port but charging will not begin until
the battery temperature cools to within acceptable
temperature range. When a hot battery pack is placed
on the charger, the charger may indicate the pack is
not ready to charge. Please refer to charger operator’s
manual. When the battery pack cools the charger will
automatically begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the
charger port but charging will not begin until the battery
temperature warms to within acceptable temperature
range. When a cold battery pack is placed on the char-
ger, the charger may indicate the pack is not ready to
charge. Please refer to charger operator’s manual. When
the battery pack warms the charger will automatically
begin charging.
990000195
3-28-13 (REV:02)
Fig. 1
OPERATION
MAINTENANCE
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road
Anderson, SC 29625, USA
1-877-617-3501
www.powerstroketools.com
Power On
Alimentation / Corriente
Testing
Evaluer / Evaluacion
Defective
Defectuex / Defectuoso
Charging
En char
ge / Car
gando
Charged
Char
ge / Car
gado
Energy Save
Mode
Mode d’economie
d’ener
gie
Modo de ahorr
o
de ener
g a
™
A - Red LED
B - Green LED
D
B
C
A
C - Battery pack
D - Battery port
This product has a One-year Limited Warranty.
For Warranty details go to
www.powerstroketools.com
