Page 6
2.3
– DISENGAGE AND ENGAGE THE MOTORS
The wheels of your wheelchair can be used in electrically powered mode or they can be switched
into manual mode in order to enable a third person to move the wheelchair without using the motor.
Both levers are located on each side of the wheelchair, at rear of the motor.
2.3.1 - Disengage and engage the drive wheels
Disengage:
.
Swing both levers outwards.
The wheels are disengaged, the wheelchair
can be pushed manually.
Swing both levers inwards.
The wheels are connected to the propulsion
engines controlled by the Joystick
Engage:
Swing both levers inwards.
The wheels are connected to the
propulsion engines controlled by the
Joystick.
