Page 21
6.1
– ELECTRIC WIRING
Ensure this assembly diagram is followed as otherwise use of the wheelchair is dangerous.
They must be correctly connected to obtain the appropriate voltage
6.2
– ERRORS
Check that the electronics have been correctly switched off.
When the battery level display lights are off:
-
Check that the batteries are full charged.
-
Check that all the cables have been connected properly.
-
Check that the electronics have been switched on.
-
Check the fuses.
After checking those points, turn the remote control « on ».
More information on
http://www.pgdt.com/products/vr2/index.html