3. Operations
3-1. Button Operation
1) Before operation, make sure that the two strings of batteries are connected
correctly in order of ”+,GND,-” terminals and the breaker of the battery pack is at
“ON” position (only for long-run model).
2) Press the “
” button to set up the power supply for the UPS. UPS will
enter into power on mode. After initialization, UPS will enter into “No Output mode”.
3-2. Screen Description
After initialization, the LCD will display main screen. There are five sub-menus:
Control, measure, setting, information and data log. Touch any sub-menu icon to
enter into the sub-screen.
MAIN
Initializing
CONTROL
DATA LOG
MEASURE
ON/OFF UPS
BATTERY TEST
MUTE ALL
MEASURE1
MEASURE2
MEASURE3
GENERAL
BASIC1
BASIC2
SETTING
INFO
ON/OFF CHARGER
DATALOG
PARAMETERS
CALIBRATION
EEPROM
TOUCH
SYS PARAMETER
PASSWORD:****
INSTALL INFO
VOL CALI
CURR CALI
INITIAL
ELECTRICAL
BATTERY
MISCELLANEOUS
UPS SELFTEST
ELECTRICAL
BATTERY
MISCELLANEOUS
PASSWORD:0000
PARAMETER INFO
RATED INFO
BASIC INFO
ADVANCE
SAVE
SETTING
User
Maintainer
Menu tree
3-2-1. Main Screen
18
