FIG 4
FIG 5
4
English
Mounting to a Magnetic Base
The light can be mounted to the PowerSmith PATLK52-MS magnetic base as shown in FIG 4.
With a magnetic base, the light can be attached to any suitable steel or iron surface.
The magnetic base is not included and is sold separately.
Mounting to a Tripod
The light can be mounted to a tripod. Mount the light to the PowerSmith work light stand
(PATLK52-HS) first, then mount the light with stand to the PowerSmith tripod (PATP265).
The work light stand and tripod are not included and is sold separately.
ADJUSTING LIGHT BEAM
The light has 6 light panels which pivot to adjust the light beam to 360°, 270° and 180°. See Figure 5 for all 3 positions.
DAISY-CHAIN POWER OUTLET
The light is equipped with a cable power outlet for daisy-chaining. Do not overload the outlet. Refer to Specifications
Section for outlet power capacity.
SWITCH ACTION
Click the on-board switch to turn On or Off the light and set the brightness in following sequence:
OFF - Half Brightness (6000 lumens) - Full Brightness (12,000 lumens) - OFF
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
WARNING:
Always make sure the work light is unplugged and
completely cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
HELP LINE
For questions about this or any other
PowerSmith
™ product,
Please call Toll-Free:
888-552-8665
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
Summary of Contents for PTLK56-100
Page 13: ...13 NOTES ...
Page 14: ...14 NOTES ...
Page 15: ...15 NOTES ...
Page 16: ...Richpower Industries Inc 736 Hampton Road Williamston SC USA www richpowerinc com 2018 11 V01 ...