Power Products ENDURA EC12M, User Manual

Page: 12 / 20

9
Charging A Battery
(continued)
4. When a battery is placed in the charging pod and while charging, the charge status
LED (F or R) will illuminate RED with no flashing to indicate normal charging.
5. If the charge status LED is RED and flashes, a fault has been detected. The flash pat-
tern represents a specific fault condition. If the status LED is ORANGE (solid or flash-
ing), an advisement is being provided. See section Fault Conditions & Advisements .
6. When the battery is charged to 80% of capacity, the charge status LED will change to
GREEN and begin to flash. It is recommended that the battery be charged to at least
80% capacity before use.
7. The charge status LED will illuminate GREEN with no flashing when the battery is fully
charged.
8. After removing a fully charged battery, the charge status LED will illuminate ORANGE
for a few seconds. Allow the charge status LED to go off before placing another
battery in the charging pod.
9. EC12M is designed to charge batteries with a temperature monitoring circuit when
the battery temperature is between 0°C and 45°C (32° F – 113° F); batteries outside
this temperature will not be charged. The ambient temperature should be 5°C - 40°C
(41° F - 104° F) while charging a battery.