Power Probe 3EZ, Manual

Page: 7 / 56

WWW.POWERPROBETEK.COM
7
INTRODUCTION TO “EZ”
The Power Probe 3EZ is the latest addition to the Power
Probe line of circuit testers. It includes all the powerful testing
modes and features of the Power Probe 3S and now includes
2 new modes- EZ Learning Mode and EZ Diagnostics Mode.
EZ Learning Mode will guide you through a step by step
familiarization of the PP3EZ, showing you how to operate the
PP3EZ and how the probe responds in certain testing condi-
tions.
EZ Diagnostics Mode will help guide you through specific
vehicle or component tests and let you know if readings ob-
tained are acceptable or outside of the desired specification.
EZ Learning Mode – Scroll the Menu down using the Left
Button until EZ LEARNING is highlighted on the menu. Select
EZ LEARNING by pressing the Right Button. EZ Learning will
now take you through a step by step process illustrating how
the probe responds and the different types of readings that
can be obtained. This mode is to be used for familiarization
and guidance only and is not a mode used for actual circuit
testing.
Once EZ LEARNING mode is selected, it must be scrolled
through from start to finish before it will exit EZ LEARNING
mode. You can also exit EZ Learning by disconnecting pow-
er from the probe and the probe will enter normal test mode
when re-connected. NOTE: If you see a flashing screen in the
menu it means go to that selection and press enter.