Power Pressure Cooker XL PPC780P, User Manual

Page: 7 / 19

• Never load Inner Pot above the MAX line. Rotate the Inner Pot to make certain that it is seated
properly on the Heating Plate.
• Always be certain the Pressure Valve is free floating and clear of any obstructions.
• Attach the AC Cord to the base of the unit then plug the AC Cord into a dedicated 120V wall outlet.
• Steam and pressure must be released completely from the Cooker before the Lid will open. To do
this, carefully follow the instructions on the previous page.
CAUTION: During this process protect your skin by avoiding any contact with escaping steam or the
stainless steel portion of the Pot Lid.
• Press down gently on Lid and turn clockwise until Lid meets resistance... lift carefully and place
aside. Avoid personal injury resulting from hot unit surfaces and dripping liquids.
Note: The “cook times” shown in the recipe booklet do not include the additional time needed to
pressurize the unit before cooking begins. Full pressurization could take up to 17 minutes.
CARE AND CLEANING
CLEANING THE SAFETY DEVICES:
In addition to the gasket, the other safety devices on the Power Pressure Cooker XL must also be cleaned after each use.
THE PRESSURE VALVE: To remove the Pressure Valve, simply pull up and valve will release from its spring lock mechanism. Apply mild detergent and wash it
under warm running water. After cleaning, check to see that the interior spring-loaded part moves freely by pressing down on it. Put the Pressure Valve back
in place by pushing it down onto the spring-loaded mechanism. This appliance requires little maintenance. It contains no user serviceable parts. Do not try to
repair it yourself. Contact customer service for qualified repair information.
TO CLEAN:
After use, unplug unit and allow to cool completely before cleaning. The Power Pressure Cooker XL must be cleaned thoroughly after each use in
order to avoid staining caused by a build-up of food or cooking residue.
DO NOT POUR COLD WATER INTO A HOT Power Pressure Cooker XL.
Note:
To ensure safe operation of this Power Pressure Cooker XL, strictly follow the cleaning and maintenance instructions after each use, should a tiny bit of
food (such as a grain of rice or pea shell) remain in the unit, it could prevent the safety devices from operating during subsequent use.
IMPORTANT:
Always remove the Pressure Valve and clean the opening with pin to remove any blockage that might have occurred during the cooking process.
This must be done after each use. The removable cooking pot and Lid are immersible for cleaning. Rinse cooking pot and Lid under hot running water. Use
only a mild liquid detergent and a soft cloth, sponge or nylon scrubber for cleaning. Do not use abrasive powders, bicarbonate of soda or bleach. Do not use
scouring pads.
WIPE BASE AFTER EACH USE WITH A SOFT, DAMP CLOTH OR SPONGE, MAKING SURE ALL FOOD RESIDUE IS REMOVED.
DO NOT IMMERSE BASE IN WATER
When cleaning the Lid, the Rubber Gasket (page 4, Illustration #1) must be removed and washed separately with a sponge or soft cloth
and warm, soapy water.
• Unplug and let the Power Pressure Cooker XL cool to room temperature before cleaning.
• Wash the removable pot with warm, soapy water and clean with a soft cloth or sponge. Rinse off with clean water and towel dry.
• The Rubber Gasket must always be properly positioned on the underside of the Lid. Check periodically to make sure that it is clean, flexible and not torn. If
damaged, do not use this unit.
• Wipe the mirror finished outer Housing with a damp soft cloth or sponge (glass cleaner gives housing a brilliant lustre).
• Never use harsh chemical detergents, scouring pads or powders on any of the parts or components.
• Always check that the Pressure Valve and Float Valve are in good working order and debris free.