Power Precision Cooker CTO5OP102, Owner'S Manual

Page: 7 / 16

Power Precision Cooker™ | Model: CTO5OP102
7
Using the Digital Control Panel
TM
NOTE:
Remove the protecting film
on the LED panel.
1. CLIP UNIT
Clip unit to side of pot as shown in
FIG I. Fill pot with water to proper
level (pg. 6 - fig. E).
2. PLUG AC CORD INTO OUTLET
The Power Button (J) will light (red)
and beep once.
3. SET TEMPERATURE
Tap Power Button once (J).
Temperature LED (M) and Gear
Icon (L) will begin to blink.
Rotate Scroll Wheel (K)
to desired temperature.
4. SET HOURS
Tap blinking Gear Icon (L) and
Hour LED (N) will begin to blink.
Set hour using Rotating Scroll
Wheel (K).
5. SET MINUTES
Tap blinking Gear Icon (L) and
Minute LED (O) will begin to blink.
Set minutes using Rotating Scroll
Wheel (K).
6. BEGIN COOKING
When temperature and time have
been set according to your recipe,
press the Power Button (J) and the
process will begin. All LED’s will
be light blue until water reaches
the selected temperature. When
the temperature is reached, the
unit will beep twice, the Working
Illuminator (pg. 6 - fig. C) will blink
blue continuously and the Timer
will begin to count down.
When the Timer reaches 0, the Unit
will beep, the Working Illuminator
(pg. 6 - fig. C) will turn red and the
LED will read END.
TIP: Secure food to pot with binder
clip. Be sure area of bag with food is
below the water line for even cooking.
FIG. I
L
J
K
N O
M