PONTOON M-BRACE MOUNTING BRACKET
INSTRUCTIONS
Need help? Contact our Technical Support Team at
1 + 813.689.9932 Option 2
©2018 all rights reserved. Power-Pole Shallow Water Anchor U.S. Patent No. 6,041,730
Installation Tools:
• 9/16” Socket with ratchet
• 9/16” Wrench
• Center Punch
• Drill
• Steel Drill Bits ¼” & 7/16”
• Tape
• Marker
Hardware Kits:
A.
(1) Port Side Arm
B.
(1) Starboard Side Arm
C.
(1) Center Plate
D.
(2) Backer Plates
E.
(12) 3/8” x 1-3/4” Bolts
F.
(8) 3/8” Flat Thunder Washers
G.
(16) Flat Thin Washers
H.
(12) 3/8” Lock Nuts
D
E
H
G
F
B
A
C
STEP 1
Hold drill template to the mounting surface and mark hole locations. Do this for both sides.
FIG. 1
Check all clearances.
STEP 2
Put the mounting bracket together as illustrated
FIG. 2
(Do not fully tighten yet). Re-check clearances with
loosely assembled bracket.
STEP 3
Drill holes in pontoon mounting surface using template to guide
FIG. 3
• Use a center punch to mark the center of hole locations.
• Drill first with a ¼” drill bit
• Finish the hole with a 7/16” drill bit
STEP 4
Repeat step 3 for the opposite side of pontoon M brace/frame rail.
Figure 1
Figure 2
Figure 3
E
F
G
G
Place Template
Drilled Holes
D
