ApusOne WA-100 User Manual
15
/
15
7.4 Play music from MAC OS
You could also play your local music via Apple iTunes via Airplay. The steps are similar with
using iTunes on PC.
8.
Recover to Factory Firmware
It may happens that power supply is broken when you upgrading your device firmware. It will
cause the
WA-100
AudioBox cannot work. At this time, you need to recover device firmware to
factory firmware.
To recover the current firmware to factory version, you can follow the steps list below:
Step 1: Press down the WPS key on
WA-100
AudioBox device then power on.
Step 2: Hold on the WPS key more than 10 seconds.
Step 3: Then release the WPS key, the device starts recovery. The LED status will be changed to
solid red and blinking red since the device needs to reboot automatically several times.
Step 4: When the LED turns to solid red, the recovery is completed and device is working with
factory firmware.
After recovery is completed, you can connect to device from PC or smart device to upgrade
firmware to newest version again.
9.
Restore to Default Settings
To restore your device to the default settings, you can follow the steps list below:
Step 1: Make sure the device is power on, then press down the WPS key on
WA-100
AudioBox
device.
Step 2: Hold on the WPS key more than 10 seconds till the LED status is solid red.
Step 3: Then release the WPS key, the device starts reset.
Step 4: When the LED turns to solid red, the restore is completed and device is working with
default settings.
After restore is completed, you can connect to device from PC or smart device, and go “Settings”
tab to setup again.
