background image

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION OR INJURY:
• Do not connect to AC distribution wiring.
• Remove appliance plug from outlet strip or turn off inverter before working on the

appliance. Multiple outlet power strips with switches and circuit breakers only
interrupt power to the “hot” receptacle terminals. The "neutral" terminals remain
powered with respect to the “ground” terminals.

• NOT approved for ignition protected areas. Do not make any electrical connections

or disconnections in areas designated as IGNITION PROTECTED.

• This is not a toy — keep away from children.
• This equipment employs components that tend to produce arcs or sparks. DO NOT

install in compartments containing batteries or flammable materials.

• Use this unit in properly ventilated areas ONLY.
• Do not open — there are no user-serviceable parts inside.
• Do not insert foreign objects into the outlet.
• Do not expose the unit to water, rain or snow.

CAUTIONS
• Always inspect battery supply connections and cables to ensure they are tight and

that cable insulation is not damaged.

• Do not use with positive ground electrical systems*. Reverse polarity connection will

result in a blown fuse and may cause permanent damage to the inverter and will
void warranty.

*The majority of modern automobiles, RVs, trucks and boats are negative ground. 

• This inverter will not operate high wattage appliances or equipment that produce

heat, such as hair dryers, microwave ovens and toasters.

• Grounding the Neutral will cause the inverter to shut down. Do not operate this

inverter if it is wet. Do not install in engine compartment — install in a well
ventilated area.

• This inverter has not been tested for use with medical devices.
• Do not attempt to install or operate this unit while operating a motor vehicle.

FOR USAGE ABOVE 100 WATTS:
• Use battery clips ONLY.
• DO NOT use the DC accessory plug or the fuse will open.

Important Cable Information

Substantial power loss and reduced battery operating time results from inverters installed with cables that

are not able to supply full power. Symptoms of low battery power can result from cables that are either

excessively long or an insufficient gauge. Marine installations are also subjected to vibration and stresses

that exceed those of other mobile installations. Therefore, the installer/operator should be especially

aware of the requirements to maintain secure, tight, water-resistant electrical connections and to provide

for strain relief for DC cables and appliance wiring. Cable insulation must be the appropriate type for

the environment.

Read This User’s Manual Before Using This Power Inverter.

SAVE THESE INSTRUCTIONS

POWER ON BOARD 2 YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the

responsibilities of Power On Board, regarding this product. There is no other warranty, other than those

described herein.
This Power On Board product is warranted, to the original purchaser only, to be free of defects in materials

and workmanship for two years from the date of purchase without additional charge.  The warranty does

not extend to subsequent purchasers or users. Power On Board will not be responsible for any amount of

damage in excess of the retail purchase price of the product under any circumstances. Incidental and

consequential damages are specifically excluded from coverage under this warranty. 
This product is not intended for commercial use. This warranty does not apply to accessories or damage to

units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power

sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned to Power On Board.

Any defective product, other than accessories, that is returned to Power On Board within 30 days of the

date of purchase will be replaced free of charge. If such a product is returned more than 30 days but less

than two years from the purchase date, Power On Board  will repair the unit or, at its option, replace it free

of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at Power On Board’s option.

A unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired

or replaced unit will then be warranted under the terms of the remainder of the warranty period. The

customer is responsible for the shipping charges on all returned items after 30 days. During the warranty

period, Power On Board will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from

normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or

exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized

use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and

Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at (800) 54-

HOW-TO for general repair information and charges if applicable. 
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on

how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,

so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal

rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or

mail. We suggest that you keep the original packaging in case you need to ship the unit. When returning

a product, include your name, address, phone number, dated sales receipt (or copy) and a description of

the reason for return and product serial number. After repairing or replacing the unit, we will make every

effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Power On Board. Enter

“PI500CP” as Model and “500 Watt Power Inverter” as Product Type. All Power On Board products must

be registered within 30 days of purchase to activate this warranty. Mail the completed registration form,

along with a copy of the original sales receipt to:

BLACK & DECKER 

4409 W. Wanda, McAllen, TX 78503 

• TOLL FREE: (800)-54-HOW-TO •  FAX: (956) 630-0492 •

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

RD010807

© 2007 VECTOR PRODUCTS, INC.

MADE IN CHINA

PI500CP_ManualEN_010807  1/8/07  4:48 PM  Page ii

Reviews: