background image

Model Number   

  60701380

Motor 

 

 2-1/2HP 

(15A) 120V~60Hz

Blade  

 

  10" Diameter 30 Tooth

 

 

 

  Carbide Tipped

Arbor Size 

 

  5/8"

No Load Speed  

  5,000 RPM

Positive Miter Stops    0, 15, 22.5, 30, 45 Deg.
Blade Tilt Capacity 

  0 - 45° Left

Max Cutting Capacity

Settings 

 

  Max Cutting Capacity

Type 

Miter Bevel  Width Height

Cross Cut  

0º 

  0º  12-3/8" 

3-9/16"

Miter 

45º 

  0º    8-1/4" 

3-9/16"

Bevel 

0º  45º 12-3/8" 

2-3/16"

Compound  45º 

45º    8-1/4" 

2-3/16"

Technical Data

10" Sliding

Compound

Miter Saw

100413rev1

Made in China

©2013 World Factory, Inc.

Distributed by:

World Factory, Inc.

Westlake, TX 76262

Model No: 60701380

10" Compound Miter Saw

with Laser Guide

Instruction Manual

Read the instructions and precautions before use of this product

Please keep this instruction manual for future reference

For warranty information, please refer to the back page of 

this instruction manual.

Power Glide Limited  Warranty

Consumer Power Tools for Home Use to Original Buyer

World Factory, Inc. (Seller) warrants to the original Buyer only, that each POWER GLIDE power tool will be 

free from defects in material and workmanship for a period of one (1) year from date of purchase.  

SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITEDWARRANTY 

SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN 

MATERIAL OR WORKMANSHIP. 

 ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN 

MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR ALTERATIONS 

ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT ARE 

NOT COVERED BY THIS LIMITED WARRANTY. To make a claim under this Limited Warranty, you must 

return the complete power tool with proof of purchase, transportation prepaid, to any World Factory, Inc. 

authorized service center. Call 1-888-422-7800 or E-mail; [email protected] for the 

location of the nearest authorized power tool service center.

Additional Limitations

THIS LIMITED WARRANTY DOES NOT APPLY TO COMMERCIAL USER OR ACCESSORY ITEMS SUCH 

AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING BELTS OR PADS, 

GRINDING WHEELS AND OTHER RELATED ITEMS.  ALL IMPLIED WARRANTIES SHALL BE LIMITED IN 

DURATION TO ONE (1) YEAR FROM DATE OF PURCHASE.  IN NO EVENT SHALL SELLER BE LIABLE 

FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY 

FOR LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.  
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such 
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if such 
invalid and/or unenforceable provision had never been contained herein.
This warranty gives you special legal rights, and you may also have other rights which vary from state to 

state.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior 
agreements, arrangements, or understandings between the parties relating to product warranty.

Due to ongoing product development the actual product or products may vary from the illustrations

or photos shown within this manual.

For Manuals, Replacement Parts or Customer Service visit:

www.ezreplacement.com

Summary of Contents for 60701380











Reviews: