V4.0
HVLP Gravity Paint Gun
8870685
Visit www.princessauto. com for more information
11
There is poor
atomization
with the
spray
concentrated
in the center.
1. The flow of paint is
greater than the
pressure and quantity of
air supplied.
2. Paint viscosity too high.
1. Clean the head and the nozzle.
2. Ensure that the paint is not too
dense and dilute if necessary.
There is little to no
paint output.
1. The fluid passage is
clogged with dirt or the
air holes in the cover are
blocked.
2. Fluid needle stroke is
too small.
1. Remove any obstructions.
2. Adjust fluid needle stroke.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
WARNING! Paint thinner and other solvents may cause health hazards. It
may also combust if exposed to an ignition source. Follow all
instructions that accompany the thinner or solvent for personal
protective equipment, safe handling and first aid. Consult the product’s
Safety Data Sheet (SDS) before use.
