Specifications
• Operating speed: 9,000 max RPM
• Torque: 75 ft-lbs
• Air inlet: 1/4" NPT
• Average air consumption: 3 CFM
• Max air pressure: 90 PSI
• 3/8" drive
Store this manual and the invoice in a safe place for future reference.
Safety Information
Warning: when using tools, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before using this tool.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lit.
Do not use electrically powered tools in the presence of flammable
gases or liquids.
3. Keep children away. Children must not be allowed in work area. Do
not let them handle machines, tools or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep them out of
reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. The tool will
perform better and more safely at the rate for which it was intended.
Do not modify this tool or used for a purpose for which it was not
designed.
6. Dress properly. Do not wear loose clothing or jewellery as they can be
caught in moving parts. Protective, electrically non-conductive clothes
and non-skid footwear are recommended when working. Tie back long
hair.
8192098manual 10/19/07 1:20 PM Page 2
