IDENTIFICATION KEY
A.
Jaws
B.
Chuck
C.
Torque Selector
D.
Function Selector
E.
Speed Selector
F.
Trigger Lock Button
G.
Trigger
H.
LED Light
I.
Charger
J.
Battery Pack
K.
Belt Clip
ASSEMBLY & INSTALLATION
1.
Insert the belt clip's curved flange into the
open slot on the drill base (Fig. 2). The clip
opening faces upward.
2.
Insert the screw through the clip's openings
and into the base's screw hole. Tighten the
screw to secure.
INSTALL EXTERNAL BATTERY
PACK
1.
Check the battery power level before each use.
•
The battery is not fully charged out of the carton. Charge the battery
before first use.
2.
Install the battery by aligning the rib on the battery with the groove on
the battery port and push forward until the latch clicks.
3.
Remove the battery by pushing the battery lock button and pulling the
battery free.
FIGURE 1.
FIGURE 1.
9054685
LI-ION CORDLESS HAMMER DRILL
V1.0
www.princessauto.com / 1-800-665-8685
Page 12