1.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose the battery charger to rain, snow, frost or any other damp
or wet conditions. Water entering a tool will increase the risk of electric
shock.
4.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
5.
This tool is equipped with a 115V three-prong grounded power supply
cord and plug. Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. If the tool should electronically
malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
POWER CORD SAFETY
1.
Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the tool's
power cord cannot reach a power supply from the work area.
a.
When operating a tool outside, use an outdoor extension cord
marked W-A or W. These cords are rated for outdoor use and reduce
the risk of electric shock.
b.
Use in conjunction with a Ground Fault Circuit Interrupter (GFCI). It is
recommended that the GFCI should have a rated residual current of
30 mA or less.
2.
Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
3.
Discontinue use if a power cord feels more than comfortably warm while
operating the tool.
V1.1
20V 2A LI-ION BATTERY CHARGER
9051467
Page 7
www.princessauto.com / 1-800-665-8685
