8978561
16 in. High-Velocity Barrel Fan
V4.0
6
For technical questions call 1-800-665-8685
POWER CORD
1. Insert the power cord plug directly to the power supply whenever possible.
Use extension cords or surge protectors only when the device's power
cord cannot reach a power supply from the work area.
a. If an extension cord must be used, the cord must be a minimum 14
AWG and rated not less than 1,875 W.
2. Do not operate this device if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
a. Inspect the device’s power cord for cracks, fraying or other faults in
the insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably warm
while operating the device.
3. Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the device.
5. Do not run the cord under carpeting or cover with throw rugs, runners or
similar coverings. Covering that cord may result in the tool overheating
and starting a fire.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
