8916082
43 in. Tower Bladeless Fan
V4.0
4
For technical questions call 1-800-665-8685
1. Use the correct device for the job. This device was designed for a specific
function. Do not modify or alter this device or use it for an unintended purpose.
2. Only use this device on a surface that is stable, level, dry and not slippery.
3. Do not use the fan near combustible gas or for circulating hot air to avoid
fire or electrical hazards.
4. Ensure that the air intake and outlet are clear of obstructions to prevent the
fan from overheating.
5. Turn the fan off before moving or carrying it. The airflow of a running unit
may cause issues with balance or stability and can lead to personal injury
or device damage.
6. Do not use solid-state speed control devices with the fan to prevent fire or
electrical hazards and personal injury.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live device with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1. Disconnect device from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the device to rain or wet conditions. Water entering a power
device will increase the risk of electric shock.
4. Do not disconnect the power cord in place of using the ON/OFF switch on
the device. This will prevent an accidental startup when the power cord is
plugged into the power supply.
5. Do not alter any parts of the device or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if altered.
6. Make certain the power source conforms to requirements of your
equipment (see Specifications).
WARNING! All wiring should be performed by a qualified electrician.
