V4.0
Spherical Bladeless Fan
8916066
Visit www.princessauto.com for more information
7
OPERATION
Press the power button (F) to provide power to the fan. The fan will not start
until the ON/OFF button (J) is also pressed.
DISPLAY PANEL AND BUTTONS
Display Panel (C)
Shows the wind speed and timer settings. The fan is in
standby mode when displaying 00.
Timer Button (H)
The timer set the running time between 0 and 12 hours.
Pressing the button once increases the timer by 1 hour.
Speed Button (I)
The fan has 8 airflow speeds. F1 is mildest and F8 is the
strongest.
ON/OFF Button (J)
Turn the fan ON or OFF.
Oscillation Button (K) Press once and the airflow will move from side-to-side.
Press again to stop the airflow in its current position.
Tilt Button (L)
Press once and the airflow will move up and down. Press
again to stop the airflow in its current position.
REMOTE CONTROL
The remote control has the same functionality as the display
panel.
CARE & MAINTENANCE
1. Maintain the device with care. A device in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the device components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the device’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the device. An
improperly repaired device may present a hazard to the user and/or others.
