V4.0
30 in. Misting Pedestal Fan
8908527
Visit www.princessauto.com for more information
9
OPERATION
1. Place the fan in an upright position in an area of the room that will allow
for proper air flow.
2. Plug the fan directly into a properly grounded wall outlet.
3. To start the fan, turn the switch from the Stop position to the desired
speed: Low, Medium or High.
4. Adjust the fan heads’ tilt angle by loosening the knob holding the fan
head to the U-bracket (A). Tighten the knob when the angle is correct.
5. Loosen the L-shaped adjustment bolt on the lower pole (C) to adjust
the fan’s height. Retighten the bolt to secure the upper pole in place.
6. Once the speed is chosen, open the faucet to supply water to the
misting ring (I).
7. Before stopping the fan, turn the faucet off and disconnect the hose
from the faucet to let the water drain out. Allow the fan to blow for a
short duration to dry the misting ring nozzles.
8. Turn the switch to the Stop position to turn off the fan.
9. Unplug the fan and store in a dry environment after use.
CARE & MAINTENANCE
WARNING! Never clean the device while connected to a power source.
Doing so may cause an electric shock. Always unplug the fan before
cleaning.
1. Maintain the device with care. A device in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the device components periodically. Repair or replace damaged
or worn components. Only use identical replacement parts when
servicing.
3. Maintain the device’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
