V1.0
8-Inch High-Velocity Floor Fan
8900870
Visit www.princessauto.com for more information
7
OPERATION
1. Place the fan on a firm, level surface.
2. Ensure the power switch is in the OFF position.
3. Tilt the fan by holding onto the base with one hand, grasping the top of
the fan cage with the other and pushing or pulling until the fan tilts to
the desired angle.
a. The fan has built in blocks to prevent tilts past a certain point.
Attempting to force past those blocks will damage the fan.
4. Plug the fan into a 120V/60Hz outlet
5. Use the power switch on the back of the fan to select the desired speed:
[0]
OFF
[1]
LOW speed.
[2]
MEDIUM speed.
[3]
HIGH speed.
CARE & MAINTENANCE
IMPORTANT! There are no user-serviceable parts in the fan. Do not
attempt to disassemble the blade or motor components. Only remove the
grilles for cleaning. Never operate the fan when the grilles are removed.
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
CLEANING
1. Periodically wipe the exterior surfaces of the fan with a damp (not
dripping wet) cloth, and then dry thoroughly with a soft dry cloth before
operating the fan.
2. You may use a soft cloth to remove light accumulated dust from the
back grille of the fan.
