V4.0
DEF Barrel Pump
8781593
Visit www.princessauto.com for more information
7
3. Check the pump and tubes immediately after use to identify potential leaks.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Rinse the pump and suction tube with an appropriate cleaner after removing
from a barrel. Check the cleaning recommendations in the liquid’s SDS.
LUBRICATION
Inspect and lubricate the tool when required. Only use light oil to lubricate the
tool. Apply a coating to all seals to prevent them from drying out. Apply a drop
of oil to any moving part or where metal rubs against metal.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
Pump does
not dispense
fluid.
1. Pump not able to
create adequate
suction.
2. Pump is drawing
in air, instead of
fluid or losing
prime.
3. Suction tube inlet
is blocked.
1. Prime pump.
2. Possible solutions:
a. Tighten all connections and seals of the
pump and suction tube.
b. Replace worn or damaged seals.
c. Dissassemble and reassemble unit with
thread sealant tape on the threads.
Ensure the sealant tape is compatible
with the pumped fluid.
3. Remove the suction tube and clean.
