Power Fist 8781460 User Manual Download Page 3

V4.0 

Barrel Pump 

8781460 

Visit www.princessauto.com for more information 

WARNING!  This notice indicates a specific hazard or unsafe practice that 

could

 result in 

severe personal injury or death

 if the proper 

precautions are not taken. 

CAUTION!  This notice indicates a potentially hazardous situation that may result 

in minor or moderate injury if proper practices are not taken. 

NOTICE! 

This notice indicates that a specific hazard or unsafe practice will 

result in equipment or property damage, but not personal injury. 

WORK AREA 

1.  Operate in a safe work environment. Keep your work area clean, well-lit 

and free of distractions. Place lights so you are not working in a shadow. 

2.  Keep anyone not wearing the appropriate safety equipment away from the 

work area. 

3.  Store unused tools properly in a safe and dry location to prevent rust or 

damage. Lock tools away and keep out of the reach of children. 

4.  Do not install or use in the presence of flammable gases, dust or liquids. 

PERSONAL SAFETY 

WARNING! Wear personal protective equipment approved by the Canadian 
Standards Association (CSA) or American National Standards Institute (ANSI). 

PERSONAL PROTECTIVE EQUIPMENT 

1.  Always wear impact safety goggles that provide front and side protection 

for the eyes. Eye protection equipment should comply with CSA Z94.3-07 

or ANSI Z87.1 standards based on the type of work performed. 

2.  Wear gloves that provide protection based on the work materials or to 

reduce the effects of tool vibration. 

3.  Wear protective clothing designed for the work environment and tool. 
4.  Non-skid footwear is recommended to maintain footing and balance in the 

work environment. 

5.  Wear a NIOSH approved respirator when working on materials that 

produce hazardous fumes, dust or particulate matter. 

Summary of Contents for 8781460





















Reviews: