8727521
Digital Moisture Meter
V4.0
6
For technical questions call 1-800-665-8685
3. Press the button repeatedly until the desired measurement mode symbol
flickers on the display. The four measurement modes are as follows:
a. Wood Moisture (I)
b. Material Moisture (G)
c. Celsius Temperature (K). A C will appear.
d. Fahrenheit Temperature (K). An F will appear.
4. Wait 3 seconds after the measurement mode is selected. The tool will
automatically exit the setting mode.
USING THE PROBE
1. Selecting the temperature measurement (K) will display the current
environment’s temperature.
2. Select the moisture measurement for wood (I) or a hard material (G). The
selection must match the type of material for a proper reading.
3. Push the probe tines (B) into the wood or material. The reading (E) will
display. The measurement only applied to the material in direct contact
with the tines. Multiple measurements in different parts of the material is
recommended for a better idea of the material’s moisture level.
4. Remove the tines and wipe clean immediately to remove debris such as
dirt, wood chips or sap.
AUTOMATIC POWER FEATURES
1. The tool will switch OFF after 15 seconds of inactivity or no change in
the measurement, when in wood moisture or material moisture
measurement mode.
2. The tool will switch OFF automatically about 15 seconds after a reading
in Fahrenheit or Celsius measurement mode.
3. The tool will switch off automatically 15 seconds after the battery
symbol appears on the display. Replace the batteries.
4. Pressing the button (D) after the tool is on will activate the backlight.
The backlight will remain on about 3 seconds before automatically
switching off.
