Power Fist 8684417, User Manual, Page: 6 / 16

8684417 20 in. Hanging Infrared Heater V4.0
6 For technical questions call 1-800-665-8685
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the tool.
d. Place the electrical cord in a position that prevents it from coming into
contact with the tool.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits.
c. Place planks on either side of the power cord to create a protective trench.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
IDENTIFICATION KEY
A Metal Chain
B Housing
C Heating Element
D Metal Grill
E Pull Switch
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
1. Mount the appropriate anchoring hardware (sold separately) to a solid,
level surface. The anchor must be capable of supporting the weight of the
unit and the force applied from tugging the pull switch (E).