8601676
5 HP Totally Enclosed Fan Cooled Electric Motor
V 4.1
The drains may require periodic maintenance to keep them clean of debris and
flowing freely. Occasionally, remove the brass drains and wash them
thoroughly. Eliminate any built up debris that may be impeding their operation.
For motors that are equipped with rubber plugs in their condensate drain holes,
be sure to remove the plug, especially if the motor is installed in a location
where condensate build up is likely.
In all instances, ensure that the drain is in the lowest portion of the motor.
Some motors may require rotation of the end plates (e.g. if the mounting
location is not a typical horizontal mounting).
LUBRICATION
The bearings are permanently lubricated and do not require additional grease.
DISPOSAL
Recycle a device damaged beyond repair at the appropriate facility.
10
For technical questions call 1-800-665-8685
