5 HP Open Drip Proof Electric Motor
8
For technical questions call: 1-800-665-8685
8513533
V 3.03
MAINTENANCE
1. Maintain the device with care. A device in good condition is efficient, easier to control and will
have fewer problems.
2. Inspect the device components periodically. Repair or replace damaged or worn components.
3. Inspect the device fittings, alignment and hoses and power supply cord periodically. Have
damaged or worn components repaired or replaced by an authorized technician.
4. Maintain the device’s label and name plate. These carry important information. If unreadable or
missing, contact Princess Auto Ltd.for replacements.
WARNING! Only qualified service personnel should repair the device. An improperly repaired device
may present a hazard to the user and/or others.
CONDENSATE DRAINS
The motor comes with one way sintered brass breather drains. These drains allow the motor to expel
liquids from the casing without allowing liquid to enter the motor.
The drains may require periodic maintenance to keep them clean of debris and flowing freely.
Occasionally, remove the brass drains and wash them thoroughly. Eliminate any built up debris that may
be impeding their operation.
For motors that are equipped with rubber plugs in their condensate drain holes, be sure to remove the
plug, especially if the motor is installed in a location where condensate build up is likely.
In all instances, ensure that the drain is in the lowest portion of the motor. Some motors may require
rotation of the end plates (e.g. if the mounting location is not a typical horizontal mounting).
LUBRICATION
The bearings are permanently lubricated and do not require additional grease.
Summary of Contents for 8513533
Page 12: ......
