Multi-Purpose Oscillating Tool
9
For technical questions call: 1-800-665-8685
8383853
V 2.0
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high
grade lubricant for the life of the unit under normal conditions. Therefore, no
further lubrication is required.
UNPACKING
1. Carefully remove the parts and accessories from the box.
2. Make sure that all items listed in the parts lists are included.
3. Inspect the parts carefully to make sure the tool was not damaged
while shipping.
4. Do not discard the packaging material until you have carefully inspected
and satisfactorily operated the tool.
WARNING! If any part is missing, do not operate the tool until the missing
parts are replaced. Failure to do so could result in serious personal injury.
OPERATION
PARTS IDENTIFICATION
ON/OFF switch
Accessory holder
Air vents
Hex key holder
