Composite Angled Air Die Grinder
4
For technical questions call: 1-800-665-8685
V 3.03
8344095
3. Wear suitable gloves to reduce the vibration effects on the user.
4. Use tools with the lowest amount of vibration when there is a choice between
different processes.
5. Do not use for extended periods. Take frequent breaks when using this tool.
6. Let the tool do the work. Grip the tool as lightly as possible (while still keeping safe
control of it).
WARNING! If abnormal vibrations occur, stop using this tool immediately.
AIR TOOL PRECAUTIONS
1. Extended exposure to air tool noise may cause hearing loss. Ear protection gear can reduce
or eliminate the noise level.
2. Inspect the tool’s air line for cracks, fraying or other faults before each use. Discontinue use
if the air line is damaged or hissing is heard from the air line or connectors, while operating
the tool. Replace the defective component/air line.
3. Do not allow people, mobile equipment or vehicles to pass over the unprotected air line.
Position the air line away from high traffic areas, in a reinforced conduit or place planks on
both sides of the airline to create a protective trench.
4. Prevent damage to the air line by observing the following:
a. Never carry the tool by the air line.
b. Keep the air line behind the tool and out of the tool’s work path.
c. Keep the air line away from heat, oil, sharp edges or moving parts.
d. Do not wrap the air line around the tool as sharp edges may pierce or crack the airline.
Coil the air line when storing.
5. A damaged or disconnected air line under pressure may whip around and inflict personal
injury or damage the work area. Secure the compressor’s air line to a fixed or permanent
structure with clamps or cable ties.
6. Install an in-line shutoff valve or regulator to allow immediate control over the air supply in
an emergency, even if a hose is ruptured.
TOOL USE AND CARE
1. Use the correct tool for the job. Maximize tool performance and safety by using the tool for
its intended task.
2. This product was designed for a specific function.
Do Not:
a. Modify or alter the tool; all parts and accessories are designed with built-in safety
features that may be compromised if altered.
b. Use the tool in a way for which it was not designed.
3. Avoid unintentional starts. Be sure the regulator is in the neutral position when not in use.
4. Maintain the product with care (see Maintenance).
INSTALLING AIR QUICK COUPLER
Prepare a standard 1/4 in. NPT male air quick coupler for use with your tool.
1. Wrap the external threads of the male quick coupler with sealant tape.
a. Wrap the tape in a clockwise direction so it will not unravel.
b. Do not tape all the threads. Leave several leading threads unwrapped for
easier alignment.
Summary of Contents for 8344095
Page 16: ......
